How much peanut oil do I need to fry a 15 pound turkey?

How much peanut oil is needed to fry a turkey?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.

How long does it take to fry a 15 pound turkey?

Once the temperature of the oil has reached 350°F (180°C), slowly and gently lower the turkey into the oil. SLOWLY AND GENTLY. Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes.

How long does it take to heat up 5 gallons of peanut oil?

Heating the oil: In our fryer, ~5 gallons of oil took ~40 minutes to heat up to 175 degrees. You have to watch this process the entire time. If the oil overheats – it can ignite. Of course, you should always keep the lid off during heating, to avoid flash fires.

THIS IS USEFUL:  Best answer: How do you make homemade food oil?

How long do you deep fry a 16 pound turkey?

Remember this rule of thumb when learning how to deep fry a turkey: each pound of turkey needs about 3 to 4 minutes to cook. That means a 12 pound turkey can take about 45 minutes, and a 16 pound turkey can take almost an hour!

Should I cook my turkey at 325 or 350?

Roast the turkey uncovered at a temperature ranging from 325°F to 350°F. Higher temperatures may cause the meat to dry out, but this is preferable to temperatures that are too low which may not allow the interior of the turkey to cook to a safe temperature.

Can I use peanut oil for deep frying?

Peanut oil, also known as groundnut oil, has a high smoke point of about 446°F (230°C). It’s popular for deep frying because it has a neutral taste ( 11 ).

How much oil do you put in a deep fryer?

Step 1: Pour in oil up to maximum fill line

Most electric deep-fryers use between 6 and 19 cups of oil; our winner uses slightly under 15 cups. This is more than enough oil for most of our recipes; when deep-frying in a Dutch oven, we typically use 8 to 12 cups.

What oil do I use to deep fry a turkey?

Tip: Peanut oil is the most popular type of oil used for deep frying a turkey, but any oil with a smoking point of 450 degrees Fahrenheit will work. Try safflower oil or corn oil if you don’t like peanut oil or are accommodating a peanut allergy.

Should I brine a turkey before deep frying?

The first step to make a delicious fried turkey is to make a good brine that will infuse the turkey with flavor before it cooks. Make my favorite turkey brine which is savory, sweet and flavored with herbs and citrus notes. Place a thawed 12-15 pound turkey in the brine for 18-24 hours.

THIS IS USEFUL:  Can you use water instead of oil to cook eggs?

How long does it take to heat 3 gallons of peanut oil to 350 degrees?

Approximately 30 minutes. Be sure the lid is on the fryer to help speed up the process. Use good quality oil with a smoke point of 400°f or higher. Vegetable, corn, canola, soybean, or peanut oils are safe to use.

How long does it take to heat 4 gallons of peanut oil to 350?

Frying step-by-step

Set your burner on medium and let your pan of oil heat for around 5 to 10 minutes. Put the meat thermometer in the center of the oil to check the temperature. The oil should be between 350 degrees Fahrenheit (177 Celsius) and 400 F (205 C), depending on what you’re cooking.