How long does it take to deep fry a 12lb turkey?
Remember this rule of thumb when learning how to deep fry a turkey: each pound of turkey needs about 3 to 4 minutes to cook. That means a 12 pound turkey can take about 45 minutes, and a 16 pound turkey can take almost an hour! Despite the long time it takes to fry, never leave a deep frying turkey unattended.
How long does it take to deep fry a 10lb turkey?
Fry turkeys that are 10 to 13 pounds for 3 minutes per pound, and for turkeys from 14 to 20 pounds, cook for 3 1/2 minutes per pound. A 10-pound turkey will take about 30 minutes. A 20-pound turkey will require about 1 hour, 10 minutes. Cook until the internal temperature reaches between 180 and 190 degrees Fahrenheit.
How much oil do I need to deep fry an 11 pound turkey?
Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.
Do you fry a turkey at 325 or 350?
The optimum cooking temperature for deep-frying the turkey is 350ºF. When the turkey is placed into the hot oil, the temperature will drop rapidly; therefore, it is important to preheat the oil to 375°F so that less time is required to restore the oil to the proper cooking temperature.
How many minutes per pound do you fry a turkey?
Cook the turkey about 3 to 4 minutes per pound. The turkey is done when the dark meat is at an internal temperature of 175° F to 180° F and all white meat is at an internal temperature of 165° F to 170° F.
How long does a turkey take to deep fry?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes. Carefully remove basket from oil, and drain turkey. Insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
Do you have to use peanut oil when frying turkey?
Which Oil Should You Use to Fry Turkey? Peanut oil is the best oil for deep frying turkey because its high flash point makes it less likely to catch on fire. The best oil for fried turkey should also be low in saturated fat because the turkey will absorb a small amount of oil as it cooks.
How do you get crispy skin on deep fried turkey?
I suggest you break down a turkey into its pieces, using the thighs, breasts and legs. Brine the pieces, then dry them out in the refrigerator to ensure extra crispy skin, before simply dipping the turkey in buttermilk and seasoned flour. I guarantee that using this method will give you perfect results every time.
Can you reuse peanut oil after deep frying?
Generally speaking, reusing the peanut oil is fine. … First, remove any food particles from the oil after frying. Second, frying causes the quality of oil to deteriorate, so after a few uses, the oil won’t be as good as it was to begin with. Third, oil tends to take some of the flavors of food fried in it.
Can I use peanut oil for deep frying?
Peanut oil, also known as groundnut oil, has a high smoke point of about 446°F (230°C). It’s popular for deep frying because it has a neutral taste ( 11 ).
How do you heat oil to 350?
What setting on the stove is 350 oil? Set your burner on medium and let your pan of oil heat for around 5 to 10 minutes. Put the meat thermometer in the center of the oil to check the temperature. The oil should be between 350 degrees Fahrenheit (177 Celsius) and 400 F (205 C), depending on what you’re cooking.